Resin Drives and Paths.
Resin bonded or Resin bound ?
We use Addagrip materials (link to addagrip)
Resin Bonded (Addastone) Non Permeable
A scatter system which provides texture and the appearance of loose gravel.
A layer of resin applied to a suitable surface and covered with loose aggregate. Once cured the remaining loose
stones are removed. Thickness is governed by aggregate size. i.e. 1-3mm aggregate will have a nominal depth of 3mm.
Resin Bound (Addaset) Permeable
The aggregate is added to the three part resin and mixed further. When amalgamation is complete the material is trowelled down to a smooth finish similar to a screed (with no loose stones). Depths are specified depending on use, normally 15mm or 18mm.
We can give advice on selecting the most suitable surface for you and your situation, based on your existing surface, limitations, topography or simply the look you prefer, ask for samples or a sight visit or both.